| Age | Commit message (Collapse) | Author |
|---|
|
This correspond to ocaml4 warning 6
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16053 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
the new Int module. Only the most obvious were removed, so there
are a lot more in the wild.
This may sound heavyweight, but it has two advantages:
1. Monomorphization is explicit, hence we do not miss particular
optimizations of equality when doing it carelessly with the generic
equality.
2. When we have removed all the generic equalities on integers, we
will be able to write something like "let (=) = ()" to retrieve all
its other uses (mostly faulty) spread throughout the code, statically.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15957 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15875 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15844 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
especially about unused definitions, unused opens and unused rec
flags.
The following patch uses information gathered using these warnings to
clean Coq source tree. In this patch, I focused on warnings whose fix
are very unlikely to introduce bugs.
(a) "unused rec flags". They cannot change the semantics of the program
but only allow the inliner to do a better job.
(b) "unused type definitions". I only removed type definitions that were
given to functors that do not require them. Some type definitions were
used as documentation to obtain better error messages, but were not
ascribed to any definition. I superficially mentioned them in one
arbitrary chosen definition to remove the warning. This is unaesthetic
but I did not find a better way.
(c) "unused for loop index". The following idiom of imperative
programming is used at several places: "for i = 1 to n do
that_side_effect () done". I replaced "i" with "_i" to remove the
warning... but, there is a combinator named "Util.repeat" that
would only cost us a function call while improving readibility.
Should'nt we use it?
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15797 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15715 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15684 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15545 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
One slight point to check someday : fourier used to
launch a tactic called Ring.polynom in some cases.
It it crucial ? If so, how to replace with the setoid_ring
equivalent ?
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15524 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
rewrite_db fails if nothing has been rewritten, and it only performs
*one* top-down pass. For the moment, use (repeat rewrite_db) for
emulating more closely autorewrite.
Btw, let's make Himsg.explain_ltac_call_trace robust wrt TacExtend
with fun(ny) parts
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15522 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15521 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- For instance, refl_equal --> eq_refl
- Npos, Zpos, Zneg now admit more uniform qualified aliases
N.pos, Z.pos, Z.neg.
- A new module BinInt.Pos2Z with results about injections from
positive to Z
- A result about Z.pow pushed in the generic layer
- Zmult_le_compat_{r,l} --> Z.mul_le_mono_nonneg_{r,l}
- Using tactic Z.le_elim instead of Zle_lt_or_eq
- Some cleanup in ring, field, micromega
(use of "Equivalence", "Proper" ...)
- Some adaptions in QArith (for instance changed Qpower.Qpower_decomp)
- In ZMake and ZMake, functor parameters are now named NN and ZZ
instead of N and Z for avoiding confusions
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15515 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15500 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15414 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15387 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Corresponding operations in locusops.ml and miscops.ml
The type of occurrences is now a clear algebraic one instead of
a bool*list hard to understand.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15372 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- Clib that does not depend on camlpX and is made to be shared by all coq
tools/scripts/...
- Lib that is Coqtop specific
As a side effect for the build system :
- Coq_config is in Clib and does not appears in makefiles
- only the BEST version of coqc and coqmktop is made
- ocamlbuild build system fails latter but is still broken
(ocamldebug finds automatically Unix but not Str. I've probably done something wrong here.)
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15144 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Util only depends on Ocaml stdlib and Utf8 tables.
Generic pretty printing and loc functions are in Pp.
Generic errors are in Errors.
+ Training white-spaces, useless open, prlist copies random erasure.
Too many "open Errors" on the contrary.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15020 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Some tests were failing on architectures without native code because
the evaluation order of arguments in a function call is not the same
on bytecode, leading to different behaviours for the psatzl tactic.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14904 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14902 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14718 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14371 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14248 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14242 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14238 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14155 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14147 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14140 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14139 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14116 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
All the functions about Z is now in a separated file BinIntDef,
which is Included in BinInt.Z. This BinInt.Z directly
implements ZAxiomsSig, and instantiates derived properties ZProp.
Note that we refer to Z instead of t inside BinInt.Z,
otherwise ring breaks later on @eq Z.t
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14106 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
A sub-module N in BinNat now contains functions add (ex-Nplus),
mul (ex-Nmult), ... and properties.
In particular, this sub-module N directly instantiates NAxiomsSig
and includes all derived properties NProp.
Files Ndiv_def and co are now obsolete and kept only for compat
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14100 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
BinPos now contain a sub-module Pos, in which are placed functions
like add (ex-Pplus), mul (ex-Pmult), ... and properties like
add_comm, add_assoc, ...
In addition to the name changes, the organisation is changed quite
a lot, to try to take advantage more of the orders < and <= instead
of speaking only of the comparison function.
The main source of incompatibilities in scripts concerns this compare:
Pos.compare is now a binary operation, expressed in terms of the
ex-Pcompare which is ternary (expecting an initial comparision as 3rd arg),
this ternary version being called now Pos.compare_cont. As for everything
else, compatibility notations (only parsing) are provided. But notations
"_ ?= _" on positive will have to be edited, since they now point to
Pos.compare.
We also make the sub-module Pos to be directly an OrderedType,
and include results about min and max.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14098 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
In the coming reorganisation, the name Z in BinInt will be a
module containing all code and properties about binary integers.
The inductive type Z hence cannot be at the same location.
Same for N and positive. Apart for this naming constraint, it
also have advantages : presenting the three types at once is
clearer, and we will be able to refer to N in BinPos (for instance
for output type of a predecessor function on positive).
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14097 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14037 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13744 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Initial plan was only to add shiftl/shiftr/land/... to N and
other number type, this is only partly done, but this work has
diverged into a big reorganisation and improvement session
of PArith,NArith,ZArith.
Bool/Bool: add lemmas orb_diag (a||a = a) and andb_diag (a&&a = a)
PArith/BinPos:
- added a power function Ppow
- iterator iter_pos moved from Zmisc to here + some lemmas
- added Psize_pos, which is 1+log2, used to define Nlog2/Zlog2
- more lemmas on Pcompare and succ/+/* and order, allow
to simplify a lot some old proofs elsewhere.
- new/revised results on Pminus (including some direct proof of
stuff from Pnat)
PArith/Pnat:
- more direct proofs (limit the need of stuff about Pmult_nat).
- provide nicer names for some lemmas (eg. Pplus_plus instead of
nat_of_P_plus_morphism), compatibility notations provided.
- kill some too-specific lemmas unused in stdlib + contribs
NArith/BinNat:
- N_of_nat, nat_of_N moved from Nnat to here.
- a lemma relating Npred and Nminus
- revised definitions and specification proofs of Npow and Nlog2
NArith/Nnat:
- shorter proofs.
- stuff about Z_of_N is moved to Znat. This way, NArith is
entirely independent from ZArith.
NArith/Ndigits:
- added bitwise operations Nand Nor Ndiff Nshiftl Nshiftr
- revised proofs about Nxor, still using functional bit stream
- use the same approach to prove properties of Nand Nor Ndiff
ZArith/BinInt: huge simplification of Zplus_assoc + cosmetic stuff
ZArith/Zcompare: nicer proofs of ugly things like Zcompare_Zplus_compat
ZArith/Znat: some nicer proofs and names, received stuff about Z_of_N
ZArith/Zmisc: almost empty new, only contain stuff about badly-named
iter. Should be reformed more someday.
ZArith/Zlog_def: Zlog2 is now based on Psize_pos, this factorizes
proofs and avoid slowdown due to adding 1 in Z instead of in positive
Zarith/Zpow_def: Zpower_opt is renamed more modestly Zpower_alt
as long as I dont't know why it's slower on powers of two.
Elsewhere: propagate new names + some nicer proofs
NB: Impact on compatibility is probably non-zero, but should be
really moderate. We'll see on contribs, but a few Require here
and there might be necessary.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13651 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- NPeano isn't Exported by default anymore (contains pow for nat).
- in coq_micromega.ml, we specify more where to find the pow of R.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13569 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13568 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
See http://caml.inria.fr/mantis/view.php?id=4940
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13413 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13323 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13294 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13293 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13220 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13036 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Use the refactored system.ml function.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13034 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13032 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- Many of them were broken, some of them after Pierre B's rework
of mli for ocamldoc, but not only (many bad annotation, many files
with no svn property about Id, etc)
- Useless for those of us that work with git-svn (and a fortiori
in a forthcoming git-only setting)
- Even in svn, they seem to be of little interest
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12972 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
The csdp path computed by the configure script wasn't used at all, but
was forcing presence of csdp at configure time whereas it is not used
at all in the build process. Instead, we replace the configure-time
check with a runtime check for existence of csdp in $PATH.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12929 85f007b7-540e-0410-9357-904b9bb8a0f7
|
