| Age | Commit message (Collapse) | Author |
|---|
|
This completes the Loc.ghost removal, the idea is to gear the API
towards optional, but uniform, location handling.
We don't print <unknown> anymore in the case there is no location.
This is what the test suite expects.
The old printing logic for located items was a bit inconsistent as
it sometimes printed <unknown> and other times it printed nothing as
the caller checked for `is_ghost` upstream.
|
|
|
|
This reverts commit 6d2802075606dcddb02dd13cbaf38ff76f8bf242, which is
an 8.6 only commit.
|
|
|
|
This way, after we merge PR#220, scripts can be fixed in a way that is
compatible with the 8.6 and trunk branches.
|
|
Previous implementations of `Pp` flushed on newline, however,
depending on the formatter this may not be always the case.
We now alwayas flush the formatters before closing the file as this is
the intended behavior.
|
|
Previously to this patch, Coq featured to distinct logging paths: the
console legacy one, based on `Pp.std_ppcmds` and Ocaml's `Format`
module, and the `Feedback` one, intended to encapsulate message inside a
more general, GUI-based feedback protocol.
This patch removes the legacy logging path and makes feedback
canonical. Thus, the core of Coq has no dependency on console code
anymore.
Additionally, this patch resolves the duplication of "document" formats
present in the same situation. The original console-based printing code
relied on an opaque datatype `std_ppcmds`, (mostly a reification of
`Format`'s format strings) that could be then rendered to the console.
However, the feedback path couldn't reuse this type due to its opaque
nature. The first versions just embedded rending of `std_ppcmds` to a
string, however in 8.5 a new "rich printing" type, `Richpp.richpp` was
introduced.
The idea for this type was to be serializable, however it brought
several problems: it didn't have proper document manipulation
operations, its format was overly verbose and didn't preserve the full
layout, and it still relied on `Format` for generation, making
client-side rendering difficult.
We thus follow the plan outlined in CEP#9, that is to say, we take a
public and refactored version of `std_ppcmds` as the canonical "document
type", and move feedback to be over there. The toplevel now is
implemented as a feedback listener and has ownership of the console.
`richpp` is now IDE-specific, and only used for legacy rendering. It
could go away in future versions. `std_ppcmds` carries strictly more
information and is friendlier to client-side rendering and display
control.
Thus, the new panorama is:
- `Feedback` has become a very module for event dispatching.
- `Pp` contains a target-independent box-based document format.
It also contains the `Format`-based renderer.
- All console access lives in `toplevel`, with console handlers private
to coqtop.
_NOTE_: After this patch, many printing parameters such as printing
width or depth should be set client-side. This works better IMO,
clients don't need to notify Coq about resizing anywmore. Indeed, for
box-based capable backends such as HTML or LaTeX, the UI can directly
render and let the engine perform the word breaking work.
_NOTE_: Many messages could benefit from new features of the output
format, however we have chosen not to alter them to preserve output.
A Future commits will move console tag handling in `Pp_style` to
`toplevel/`, where it logically belongs.
The only change with regards to printing is that the "Error:" header was
added to console output in several different positions, we have removed
some of this duplication, now error messages should be a bit more
consistent.
|
|
We also remove flushing operations `msg_with`, now the flushing
responsibility belong to the owner of the formatter.
|
|
Mostly unused, we ought to limit spacing in the boxes themselves.
|
|
No functional change.
|
|
This is cumbersome, because now code may fail at link time if it's not
referring to the correct module name. Therefore, one has to add corresponding
open statements a the top of every file depending on a Ltac module. This
includes seemingly unrelated files that use EXTEND statements.
|
|
|
|
This removes quite a few unsafe casts. Unluckily, I had to reintroduce
the old non-module based names for these data structures, because I could
not reproduce easily the same hierarchy in EConstr.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This reverts commit 69c4e7cfa0271f024b2178082e4be2e3ca3be263.
String.capitalize_ascii are only available for ocaml >= 4.03, sorry...
|
|
|
|
|
|
- A few tweaks of string are now done via the Bytes module
- lots of String.capitalize_ascii and co
|
|
No more pp_alias_spec et pp_alias_decl.
Instead, we use "include" and "module type of".
The extracted code might hence need OCaml 3.12 (quite rarely)
|
|
Not_found)
This clarifies the execution flow
|
|
A double call to pp_module_type inside Ocaml.pp_specif was
causing an complexity blowup when pretty-printing heavily modular
extracted code.
I wasn't able to figure out why this double call is there. It could
be the leftover of some intermediate work in 2007 before commit 350398eae
(which introduced global printing phases Pre/Impl/Intf).
Anyway I'm reasonably sure that today these two pp_module_type calls produce
the exact same pretty-printed signature (even if there's a large bunch of
imperative states around). Moreover, this duplicated signature is actually
slightly wrong: when we alias a module M with a unambiguous name like Coq__123,
the type of Coq__123 should not be an exact copy of the type of M, but rather
a "strengthened" version of it (with equality between inductive types).
So the best solution is now to use this funny feature of OCaml introduced in 3.12 :
module Coq__123 : module type of struct include M end
This "module type of struct include" is slightly awkward, but short, correct,
and trivial to produce :-). And I doubt anybody will object to the (rare) use
of some 3.12 features in extracted code of 2017...
|
|
A double call to pp_module_type inside Ocaml.pp_specif was
causing an complexity blowup when pretty-printing heavily modular
extracted code.
I wasn't able to figure out why this double call is there. It could
be the leftover of some intermediate work in 2007 before commit 350398eae
(which introduced global printing phases Pre/Impl/Intf).
Anyway I'm reasonably sure that today these two pp_module_type calls produce
the exact same pretty-printed signature (even if there's a large bunch of
imperative states around). Moreover, this duplicated signature is actually
slightly wrong: when we alias a module M with a unambiguous name like Coq__123,
the type of Coq__123 should not be an exact copy of the type of M, but rather
a "strengthened" version of it (with equality between inductive types).
So the best solution is now to use this funny feature of OCaml introduced in 3.12 :
module Coq__123 : module type of struct include M end
This "module type of struct include" is slightly awkward, but short, correct,
and trivial to produce :-). And I doubt anybody will object to the (rare) use
of some 3.12 features in extracted code of 2017...
|
|
|
|
This brings the fix in cad44fc for #2996 to the copy of
Fast_typeops.check_hyps_inclusion.
Fast_typeops.constant_type checks the universe constraints instead of
outputting them. Since everyone who used Typeops.constant_type just
discarded the constraints they've been switched to constant_type_in
which should be the same in Fast_typeops and Typeops.
There are some small differences in the interfaces:
- Typeops.type_of_projection <->
Fast_typeops.type_of_projection_constant to avoid collision with the
internally used type_of_projection (which gives the type of [Proj(p,c)]).
- check_hyps_inclusion takes [('a -> constr)] and ['a] instead of
[constr] for reporting errors.
|
|
The word "increment" is more appropriate in this case than "lifting".
The world "lifting", in computer science, usually denotes something else:
https://en.wikipedia.org/wiki/Lambda_lifting
|
|
|
|
|
|
|
|
|
|
There was no reason to keep them separate since quite a long time. Historically,
they were making Genarg depend or not on upper strata of the code, but since
it was moved to lib/ this is not justified anymore.
|
|
Suggested by @ppedrot
|
|
As noted by @ppedrot, the first is redundant. The patch is basically a renaming.
We didn't make the component optional yet, but this could happen in a
future patch.
|
|
|
|
module)
For the moment, there is an Error module in compilers-lib/ocamlbytecomp.cm(x)a
|
|
This is a reimplementation of Hugo's PR#117.
We are trying to address the problem that the name of some reduction functions
was not saying what they were doing (e.g. whd_betadeltaiota was doing let-in
reduction). Like PR#117, we are careful that no function changed semantics
without changing the names. Porting existing ML code should be a matter of
renamings a few function calls.
Also, we introduce more precise reduction flags fMATCH, fFIX, fCOFIX
collectively denominated iota.
We renamed the following functions:
Closure.betadeltaiota -> Closure.all
Closure.betadeltaiotanolet -> Closure.allnolet
Reductionops.beta -> Closure.beta
Reductionops.zeta -> Closure.zeta
Reductionops.betaiota -> Closure.betaiota
Reductionops.betaiotazeta -> Closure.betaiotazeta
Reductionops.delta -> Closure.delta
Reductionops.betalet -> Closure.betazeta
Reductionops.betadelta -> Closure.betadeltazeta
Reductionops.betadeltaiota -> Closure.all
Reductionops.betadeltaiotanolet -> Closure.allnolet
Closure.no_red -> Closure.nored
Reductionops.nored -> Closure.nored
Reductionops.nf_betadeltaiota -> Reductionops.nf_all
Reductionops.whd_betadelta -> Reductionops.whd_betadeltazeta
Reductionops.whd_betadeltaiota -> Reductionops.whd_all
Reductionops.whd_betadeltaiota_nolet -> Reductionops.whd_allnolet
Reductionops.whd_betadelta_stack -> Reductionops.whd_betadeltazeta_stack
Reductionops.whd_betadeltaiota_stack -> Reductionops.whd_all_stack
Reductionops.whd_betadeltaiota_nolet_stack -> Reductionops.whd_allnolet_stack
Reductionops.whd_betadelta_state -> Reductionops.whd_betadeltazeta_state
Reductionops.whd_betadeltaiota_state -> Reductionops.whd_all_state
Reductionops.whd_betadeltaiota_nolet_state -> Reductionops.whd_allnolet_state
Reductionops.whd_eta -> Reductionops.shrink_eta
Tacmach.pf_whd_betadeltaiota -> Tacmach.pf_whd_all
Tacmach.New.pf_whd_betadeltaiota -> Tacmach.New.pf_whd_all
And removed the following ones:
Reductionops.whd_betaetalet
Reductionops.whd_betaetalet_stack
Reductionops.whd_betaetalet_state
Reductionops.whd_betadeltaeta_stack
Reductionops.whd_betadeltaeta_state
Reductionops.whd_betadeltaeta
Reductionops.whd_betadeltaiotaeta_stack
Reductionops.whd_betadeltaiotaeta_state
Reductionops.whd_betadeltaiotaeta
They were unused and having some reduction functions perform eta is confusing
as whd_all and nf_all don't do it.
|
|
On the user side, coqtop and coqc take a list of warning names or categories
after -w. No prefix means activate the warning, a "-" prefix means deactivate
it, and "+" means turn the warning into an error. Special categories include
"all", and "default" which contains the warnings enabled by default.
We also provide a vernacular Set Warnings which takes the same flags as argument.
Note that coqc now prints warnings.
The name and category of a warning are printed with the warning itself.
On the developer side, Feedback.msg_warning is still accessible, but the
recommended way to print a warning is in two steps:
1) create it by:
let warn_my_warning =
CWarnings.create ~name:"my-warning" ~category:"my-category"
(fun args -> Pp.strbrk ...)
2) print it by:
warn_my_warning args
|
|
|
|
|
|
For now, the pack name reuse the previous .cma name of the plugin,
(extraction_plugin, etc).
The earlier .mllib files in plugins are now named .mlpack.
They are also handled by bin/ocamllibdep, just as .mllib.
We've slightly modified ocamllibdep to help setting the -for-pack
options: in *.mlpack.d files, there are some extra variables such as
foo/bar_FORPACK := -for-pack Baz
when foo/bar.ml is mentioned in baz.mlpack.
When a plugin is calling a function from another plugin, the name
need to be qualified (Foo_plugin.Bar.baz instead of Bar.baz).
Btw, we discard the generated files plugins/*/*_mod.ml, they are
obsolete now, replaced by DECLARE PLUGIN.
Nota: there's a potential problem in the micromega directory,
some .ml files are linked both in micromega_plugin and in csdpcert.
And we now compile these files with a -for-pack, even if they are
not packed in the case of csdpcert. In practice, csdpcert seems
to work well, but we should verify with OCaml experts.
|
|
|
|
This patch splits pretty printing representation from IO operations.
- `Pp` is kept in charge of the abstract pretty printing representation.
- The `Feedback` module provides interface for doing printing IO.
The patch continues work initiated for 8.5 and has the following effects:
- The following functions in `Pp`: `pp`, `ppnl`, `pperr`, `pperrnl`,
`pperr_flush`, `pp_flush`, `flush_all`, `msg`, `msgnl`, `msgerr`,
`msgerrnl`, `message` are removed. `Feedback.msg_*` functions must be
used instead.
- Feedback provides different backends to handle output, currently,
`stdout`, `emacs` and CoqIDE backends are provided.
- Clients cannot specify flush policy anymore, thus `pp_flush` et al are
gone.
- `Feedback.feedback` takes an `edit_or_state_id` instead of the old
mix.
Lightly tested: Test-suite passes, Proof General and CoqIDE seem to work.
|
