| Age | Commit message (Collapse) | Author |
|---|
|
As noted by @ppedrot, the first is redundant. The patch is basically a renaming.
We didn't make the component optional yet, but this could happen in a
future patch.
|
|
|
|
Because refreshing Prop is not semantics-preserving,
the new universe is >= Set, so cannot be minimized to Prop
afterwards.
|
|
This fixes the end of bug #4069, provoked by a use
of unshelve refine which introduces a cast.
|
|
In congruence, refresh universes including the Set/Prop ones so that
congruence works with cumulativity, not restricting itself to the
inferred types of terms that are manipulated but allowing them to be
used at more general types. This fixes bug #4609.
|
|
For the moment, there is a Closure module in compiler-libs/ocamloptcomp.cm(x)a
|
|
module)
For the moment, there is an Error module in compilers-lib/ocamlbytecomp.cm(x)a
|
|
This is a reimplementation of Hugo's PR#117.
We are trying to address the problem that the name of some reduction functions
was not saying what they were doing (e.g. whd_betadeltaiota was doing let-in
reduction). Like PR#117, we are careful that no function changed semantics
without changing the names. Porting existing ML code should be a matter of
renamings a few function calls.
Also, we introduce more precise reduction flags fMATCH, fFIX, fCOFIX
collectively denominated iota.
We renamed the following functions:
Closure.betadeltaiota -> Closure.all
Closure.betadeltaiotanolet -> Closure.allnolet
Reductionops.beta -> Closure.beta
Reductionops.zeta -> Closure.zeta
Reductionops.betaiota -> Closure.betaiota
Reductionops.betaiotazeta -> Closure.betaiotazeta
Reductionops.delta -> Closure.delta
Reductionops.betalet -> Closure.betazeta
Reductionops.betadelta -> Closure.betadeltazeta
Reductionops.betadeltaiota -> Closure.all
Reductionops.betadeltaiotanolet -> Closure.allnolet
Closure.no_red -> Closure.nored
Reductionops.nored -> Closure.nored
Reductionops.nf_betadeltaiota -> Reductionops.nf_all
Reductionops.whd_betadelta -> Reductionops.whd_betadeltazeta
Reductionops.whd_betadeltaiota -> Reductionops.whd_all
Reductionops.whd_betadeltaiota_nolet -> Reductionops.whd_allnolet
Reductionops.whd_betadelta_stack -> Reductionops.whd_betadeltazeta_stack
Reductionops.whd_betadeltaiota_stack -> Reductionops.whd_all_stack
Reductionops.whd_betadeltaiota_nolet_stack -> Reductionops.whd_allnolet_stack
Reductionops.whd_betadelta_state -> Reductionops.whd_betadeltazeta_state
Reductionops.whd_betadeltaiota_state -> Reductionops.whd_all_state
Reductionops.whd_betadeltaiota_nolet_state -> Reductionops.whd_allnolet_state
Reductionops.whd_eta -> Reductionops.shrink_eta
Tacmach.pf_whd_betadeltaiota -> Tacmach.pf_whd_all
Tacmach.New.pf_whd_betadeltaiota -> Tacmach.New.pf_whd_all
And removed the following ones:
Reductionops.whd_betaetalet
Reductionops.whd_betaetalet_stack
Reductionops.whd_betaetalet_state
Reductionops.whd_betadeltaeta_stack
Reductionops.whd_betadeltaeta_state
Reductionops.whd_betadeltaeta
Reductionops.whd_betadeltaiotaeta_stack
Reductionops.whd_betadeltaiotaeta_state
Reductionops.whd_betadeltaiotaeta
They were unused and having some reduction functions perform eta is confusing
as whd_all and nf_all don't do it.
|
|
For now, the pack name reuse the previous .cma name of the plugin,
(extraction_plugin, etc).
The earlier .mllib files in plugins are now named .mlpack.
They are also handled by bin/ocamllibdep, just as .mllib.
We've slightly modified ocamllibdep to help setting the -for-pack
options: in *.mlpack.d files, there are some extra variables such as
foo/bar_FORPACK := -for-pack Baz
when foo/bar.ml is mentioned in baz.mlpack.
When a plugin is calling a function from another plugin, the name
need to be qualified (Foo_plugin.Bar.baz instead of Bar.baz).
Btw, we discard the generated files plugins/*/*_mod.ml, they are
obsolete now, replaced by DECLARE PLUGIN.
Nota: there's a potential problem in the micromega directory,
some .ml files are linked both in micromega_plugin and in csdpcert.
And we now compile these files with a -for-pack, even if they are
not packed in the case of csdpcert. In practice, csdpcert seems
to work well, but we should verify with OCaml experts.
|
|
This patch splits pretty printing representation from IO operations.
- `Pp` is kept in charge of the abstract pretty printing representation.
- The `Feedback` module provides interface for doing printing IO.
The patch continues work initiated for 8.5 and has the following effects:
- The following functions in `Pp`: `pp`, `ppnl`, `pperr`, `pperrnl`,
`pperr_flush`, `pp_flush`, `flush_all`, `msg`, `msgnl`, `msgerr`,
`msgerrnl`, `message` are removed. `Feedback.msg_*` functions must be
used instead.
- Feedback provides different backends to handle output, currently,
`stdout`, `emacs` and CoqIDE backends are provided.
- Clients cannot specify flush policy anymore, thus `pp_flush` et al are
gone.
- `Feedback.feedback` takes an `edit_or_state_id` instead of the old
mix.
Lightly tested: Test-suite passes, Proof General and CoqIDE seem to work.
|
|
|
|
|
|
printer in the congruence tactic.
Debugging messages were always built even when not in the verbose mode
of congruence.
|
|
The ARGUMENT EXTEND macro was discriminating between parsing entries known
statically, i.e. defined in Pcoq and unknown entires. Although simplifying
a bit the life of the plugin writer, it made actual interpretation difficult
to predict and complicated the code of the ARGUMENT EXTEND macro.
After this patch, all parsing entries and generic arguments used in an
ARGUMENT EXTEND macro must be reachable by the ML code. This requires adding
a few more "open Pcoq.X" and "open Constrarg" here and there.
|
|
in cctac which does not support indices properly.
Incidentally, this should fix a failure in RelationAlgebra, where
making prod_applist more robust (e8c47b652) revealed the discriminate
bug in congruence.
|
|
|
|
|
|
Originally, rel-context was represented as:
Context.rel_context = Names.Name.t * Constr.t option * Constr.t
Now it is represented as:
Context.Rel.t = LocalAssum of Names.Name.t * Constr.t
| LocalDef of Names.Name.t * Constr.t * Constr.t
Originally, named-context was represented as:
Context.named_context = Names.Id.t * Constr.t option * Constr.t
Now it is represented as:
Context.Named.t = LocalAssum of Names.Id.t * Constr.t
| LocalDef of Names.Id.t * Constr.t * Constr.t
Motivation:
(1) In "tactics/hipattern.ml4" file we define "test_strict_disjunction"
function which looked like this:
let test_strict_disjunction n lc =
Array.for_all_i (fun i c ->
match (prod_assum (snd (decompose_prod_n_assum n c))) with
| [_,None,c] -> isRel c && Int.equal (destRel c) (n - i)
| _ -> false) 0 lc
Suppose that you do not know about rel-context and named-context.
(that is the case of people who just started to read the source code)
Merlin would tell you that the type of the value you are destructing
by "match" is:
'a * 'b option * Constr.t (* worst-case scenario *)
or
Named.Name.t * Constr.t option * Constr.t (* best-case scenario (?) *)
To me, this is akin to wearing an opaque veil.
It is hard to figure out the meaning of the values you are looking at.
In particular, it is hard to discover the connection between the value
we are destructing above and the datatypes and functions defined
in the "kernel/context.ml" file.
In this case, the connection is there, but it is not visible
(between the function above and the "Context" module).
------------------------------------------------------------------------
Now consider, what happens when the reader see the same function
presented in the following form:
let test_strict_disjunction n lc =
Array.for_all_i (fun i c ->
match (prod_assum (snd (decompose_prod_n_assum n c))) with
| [LocalAssum (_,c)] -> isRel c && Int.equal (destRel c) (n - i)
| _ -> false) 0 lc
If the reader haven't seen "LocalAssum" before, (s)he can use Merlin
to jump to the corresponding definition and learn more.
In this case, the connection is there, and it is directly visible
(between the function above and the "Context" module).
(2) Also, if we already have the concepts such as:
- local declaration
- local assumption
- local definition
and we describe these notions meticulously in the Reference Manual,
then it is a real pity not to reinforce the connection
of the actual code with the abstract description we published.
|
|
|
|
|
|
Conflicts:
lib/cSig.mli
|
|
The Map interface of upcoming OCaml 4.03 includes a new union operator. In
order to make our homemade implementation of Maps compatible with OCaml
versions from 3.12 to 4.03, we define our own signatures for Maps.
|
|
- Had to add a Sigma.to_evar_map
- Had to rework coqdep_common.ml{,i} and coqdep.ml
|
|
for reporting it.
A "cut" was not appropriately chained on the second goal but on both
goals, with the chaining on the first goal introducing noise.
|
|
|
|
|
|
|
|
|
|
|
|
Some functions from pretyping/typing.ml and their derivatives were potential
source of evarmap leaks, as they dropped their resulting evarmap. This commit
clarifies the situation by renaming them according to a unsafe_* scheme. Their
sound variant is likewise renamed to their old name. The following renamings
were made.
- Typing.type_of -> unsafe_type_of
- Typing.e_type_of -> type_of
- A new e_type_of function that matches the e_ prefix policy
- Tacmach.pf_type_of -> pf_unsafe_type_of
- A new safe pf_type_of function.
All uses of unsafe_* functions should be eventually eliminated.
|
|
|
|
|
|
of plugins.
|
|
|
|
|
|
|
|
|
|
Instead of modifying exceptions to wear additional information, we instead use
a dedicated type now. All exception-using functions were modified to support
this new type, in particular Future's fix_exn-s and the tactic monad.
To solve the problem of enriching exceptions at raise time and recover this
data in the try-with handler, we use a global datastructure recording the
given piece of data imperatively that we retrieve in the try-with handler.
We ensure that such instrumented try-with destroy the data so that there
may not be confusion with another exception. To further harden the correction
of this structure, we also check for pointer equality with the last raised
exception.
The global data structure is not thread-safe for now, which is incorrect as
the STM uses threads and enriched exceptions. Yet, we splitted the patch in
two parts, so that we do not introduce dependencies to the Thread library
immediatly. This will allow to revert only the second patch if ever we
switch to OCaml-coded lightweight threads.
|
|
|
|
The Unsafe module is for unsafe tactics which cannot be done without anytime soon. Whereas V82 indicates a function which we want to get rid of and that shouldn't be used in a new function.
|
|
committed by mistake. The message pretended to have a fix which is only
superficially a fix. The problem is more complex.
This reverts commit 251218905daea0838a3738466afa1c278bb3e81b.
|
|
Proofs of C t1..tn+1 = C t1..tn+1, even when the terms were
syntactically the same, were built by composition of a proof of C
t1..tn = C t1..tn with a proof of reflexivity of tn+1. The latter was
reduced to showing C t1..tn = C u1..un for C u1..un the canonical
representant of C t1..tn in its congruence class. But if some pair
ti=ui was derivable by injectivity of the constructor C, it might go
back to find a proof of C t1..tn+1 = C t1..tn+1 again, while a simple
reflexivity proof was enough here.
Not sure that the fix prevents any further loop in this part of the
code though.
|
|
so as to reproduce correctly the reduction behavior of existing
projections, i.e. delta + iota. Make [projection] an abstract datatype
in Names.ml, most of the patch is about using that abstraction.
Fix unification.ml which tried canonical projections too early in
presence of primitive projections.
|
|
1. Proofview.Goal.enter into Proofview.Goal.nf_enter.
2. Proofview.Goal.raw_enter into Proofview.Goal.enter.
3. Proofview.Goal.goals -> Proofview.Goals.nf_goals
4. Proofview.Goal.raw_goals -> Proofview.Goals.goals
5. Ftactic.goals -> Ftactic.nf_goals
6. Ftactic.raw_goals -> Ftactic.goals
This is more uniform with the other functions of Coq.
|
|
|
|
scheme, redundancies, possibility of chaining a tactic knowing the
name of introduced hypothesis, new proof engine).
|
|
- made "apply" tactics of type Proofview.tactic, as well as other inner
functions about elim and assert
- used same hypothesis naming policy for intros and internal_cut (towards a
reorganization of intro patterns)
- "apply ... in H as pat" now supports any kind of introduction
pattern (doc not changed)
|
|
- realargs: refers either to the indices of an inductive, or to the proper args
of a constructor
- params: refers to parameters (which are common to inductive and constructors)
- allargs = params + realargs
- realdecls: refers to the defining context of indices or proper args
of a constructor (it includes letins)
- paramdecls: refers to the defining context of params (it includes letins)
- alldecls = paramdecls + realdecls
|
|
|
|
|
