| Age | Commit message (Collapse) | Author |
|---|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16510 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
States.freeze takes ~marshallable:bool, so that (only) when we want to
marshal data to disk/network we can ask the freeze functions of the
summary to force lazy values. The flag is propagated to Lib and Summary.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16478 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Doing coqtop -l on a file starting with Reset Initial used to fail.
To avoid that, we now always place an initial DOT in the libstack.
Backtrack.reset_initial has been adapted accordingly: during an
interactive session following a Load via coqtop -l (or .coqrc),
a Reset Initial will bring back at the start of the interactive
session, *not* undoing the initial Load.
Note : Reset Initial might hence not be equivalent anymore to BackTo 1.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16449 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- Most of the time, the table registered via Summary.declare_summary
is just a single reference. A new function Summary.ref now allows
to both declare this ref and register it to summary in one shot.
- Clarifications concerning the role of [init_function].
For statically registered tables that don't need a special initializer,
just do nothing there (see the new Summary.nop function).
Beware: now that Summary exports a function named "ref", any code that
do an "open Summary" will probably fail to compile.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16441 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16222 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Ok, this is merely a matter of taste, but up to now the usage
in Coq is rather to use capital letters instead of _ in the
names of inner modules.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16221 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
For the moment, the compatibility names about these new modules
are still used in the rest of Coq.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16220 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- a module KernelPair for improving sharing between constant and mind
- shorter representation than a pair when possible
- exports comparisions on constant and mind and ...
- a kn_equal function instead of Int.equal (kn_ord ...) 0
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16217 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16210 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16165 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16098 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16097 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16072 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16071 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15993 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
the new Int module. Only the most obvious were removed, so there
are a lot more in the wild.
This may sound heavyweight, but it has two advantages:
1. Monomorphization is explicit, hence we do not miss particular
optimizations of equality when doing it carelessly with the generic
equality.
2. When we have removed all the generic equalities on integers, we
will be able to write something like "let (=) = ()" to retrieve all
its other uses (mostly faulty) spread throughout the code, statically.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15957 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15844 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
List module. That way, an "open Util" in the header permits using
any function of CList in the List namespace (and in particular, this
permits optimized reimplementations of the List functions, as, for
example, tail-rec implementations.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15801 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
They are still marked as safe if they are part of a module type, though.
Also local assumptions such as "Hypothesis" or "Context" are displayed
as unsafe if they happen to be defined without a section.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15760 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15715 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
grammar.cma
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15384 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Corresponding operations in locusops.ml and miscops.ml
The type of occurrences is now a clear algebraic one instead of
a bool*list hard to understand.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15372 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Migrate the backtracking code from ide_slave.ml into a new backtrack.ml.
In particular the history stack of commands that used to be there is now
non-coqide-specific.
** Adapted commands **
- "Show Script": a basic functional version is restored (and the printing
of scripts at Qed in coqtop). No indentation, one Coq command per line,
based on the vernac_expr asts recorded in the history stack, printed via
Ppvernac.
- "Back n" : now mimics the backtrack of coqide: it goes n steps back
(both commands and proofs), and maybe more if needed to avoid re-entering
a proof (it outputs a warning in this case).
- "BackTo n" : still try to go back to state n, but it also handles the
proof state, and it may end on some state n' <= n if needed to avoid
re-entering a proof. Ideally, it could someday be used by ProofGeneral
instead of the complex Backtrack command.
** Compatible commands **
- "Backtrack" is left intact from compatibility with current ProofGeneral.
We simply re-synchronize the command history stack after each Backtrack.
- "Undo" is kept as a standard command, not a backtracking one, a bit like
"Focus". Same for "Restart" and "Abort". All of these are now accepted
in coqide (Undo simply triggers a warning).
- Undocumented command "Undo To n" (counting from start of proof instead of
from end) also keep its semantics, it is simply made compatible with
the new stack mechanism.
** New restrictions **
We now forbid backtracking commands (Reset* / Back*) inside files
when Load'ing or compiling, or inside VernacList/VernacTime/VernacFail.
Too much work dealing with these situation that nobody uses.
** Internal details **
Internally, the command stack differs a bit from what was in Ide_slave
earlier (which was inspired by lisp code in ProofGeneral). We now tag
commands that are unreachable by a backtrack, due to some proof being
finished, aborted, restarted, or partly Undo'ed. This induce a bit of
bookkeeping during Qed/Abort/Restart/Undo, but then the backtracking code
is straightforward: we simply search backward the first reachable state
starting from the desired place. We don't depend anymore on the proof
names (apart in the last proof block), It's more robust this way
(think of re-entering a M.foo from an outside proof foo).
Many internal clarifications in Lib, Vernac, etc. For instance
"Reset Initial" is now just a BackTo 1, while "Reset foo" now calls
(Lib.label_before_name "foo"), and performs a BackTo to the corresponding
label.
Concerning Coqide, we directly suppress the regular printing of goals
via a flag in Vernacentries. This avoid relying on a classification
of commands in Ide_slave as earlier.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15085 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
This command isn't trivial to port to the forthcoming evolution of
backtracking in coqtop. Moreover, it isn't clear whether this
"Delete" works well in advanced situation (was not updating
frozen states).
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15084 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Util only depends on Ocaml stdlib and Utf8 tables.
Generic pretty printing and loc functions are in Pp.
Generic errors are in Errors.
+ Training white-spaces, useless open, prlist copies random erasure.
Too many "open Errors" on the contrary.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15020 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
These annotations are purely optional, but could be quite helpful
when trying to understand the code, and in particular trying to
trace which which data-structure may end in the libobject part
of a vo. By the way, we performed some code simplifications :
- in Library, a part of the REQUIRE objects was unused.
- in Declaremods, we removed some checks that were marked as
useless, this allows to slightly simplify the stored objects.
To investigate someday : in recordops, the RECMETHODS is storing
some evar_maps. This is ok for the moment, but might not be in
the future (cf previous commit on auto hints). This RECMETHODS
was not detected by my earlier tests : not used in the stdlib ?
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14627 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14468 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
This approach, inspired by ProofGeneral, is *much* simplier than earlier,
and should be more robust (I hope! feedback of testers is welcome).
Coqide still continues to send orders like "Rewind 5" for undoing 5 phrases.
A stack on the coqtop side (in Ide_slave) convert this phrase count to
labels in the sense of Backtrack, and to abort + depth informations
concerning proofs.
We avoid re-entering finished proofs during Rewind by some extra backtracking
until before these proofs. The amount of extra backtracking is then answered
by coqtop to coqide. Now:
- for go_to_insert (the "goto" button), unlike PG, coqide replays
the extra backtracked zone.
- for undo_last_step (the "back" button), coqide now leaves the extra
backtracked zone undone, just like PG. This happens typically when
undoing a Qed, and this should be the only visible semantical change
of this patch.
Two points to check with Pierre C:
- such a coqtop-side stack mapping labels to opened proofs might be
interesting to PG, instead of passing lots of info via the prompt and
computing stuff in emacs.
- Unlike PG, we allow re-entering inside a module / section, while
PG retracts to the start of it. Coqide seems to work fine this way, to
check.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14455 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
We now forbid a "BackTo n" or "Backtrack n _ _" when n is
the current label or a future one.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14453 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
This allows more sharing of code (cf. start_module / end_module)
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14452 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
In particular, the unused lib/tlm.ml and lib/gset.ml are removed
In addition, to simplify code, Libobject.record_object returning only the
('a->obj) function, which is enough almost all the time.
Use Libobject.record_object_full if you really need also the (obj->'a).
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13460 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13323 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Including a module or module type into the top module.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12994 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- Many of them were broken, some of them after Pierre B's rework
of mli for ocamldoc, but not only (many bad annotation, many files
with no svn property about Id, etc)
- Useless for those of us that work with git-svn (and a fortiori
in a forthcoming git-only setting)
- Even in svn, they seem to be of little interest
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12972 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Simplified in passing generation of names for the "Goal" command.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12910 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
As we can now jump right onto a closed segment, there is no need for
complicated pattern matching.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12758 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
You can now BackTo directly inside segments
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12757 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
of objects having the same name as the section).
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12496 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
1- Management of the name-space in a modular development / sharing of non-logical objects.
2- Performance of atomic module operations (adding a module to the environment, subtyping ...).
1-
There are 3 module constructions which derive equalities on fields from a module to another:
Let P be a module path and foo a field of P
Module M := P.
Module M.
Include P.
...
End M.
Declare Module K : S with Module M := P.
In this 3 cases we don't want to be bothered by the duplication of names.
Of course, M.foo delta reduce to P.foo but many non-logical features of coq
do not work modulo conversion (they use eq_constr or constr_pat object).
To engender a transparent name-space (ie using P.foo or M.foo is the same thing)
we quotient the name-space by the equivalence relation on names induced by the
3 constructions above.
To implement this, the types constant and mutual_inductive are now couples of
kernel_names. The first projection correspond to the name used by the user and the second
projection to the canonical name, for example the internal name of M.foo is
(M.foo,P.foo).
So:
*************************************************************************************
* Use the eq_(con,mind,constructor,gr,egr...) function and not = on names values *
*************************************************************************************
Map and Set indexed on names are ordered on user name for the kernel side
and on canonical name outside. Thus we have sharing of notation, hints... for free
(also for a posteriori declaration of them, ex: a notation on M.foo will be
avaible on P.foo). If you want to use this, use the appropriate compare function
defined in name.ml or libnames.ml.
2-
No more time explosion (i hoppe) when using modules i have re-implemented atomic
module operations so that they are all linear in the size of the module. We also
have no more unique identifier (internal module names) for modules, it is now based
on a section_path like mechanism => we have less substitutions to perform at require,
module closing and subtyping but we pre-compute more information hence if we instanciate
several functors then we have bigger vo.
Last thing, the checker will not work well on vo(s) that contains one of the 3 constructions
above, i will work on it soon...
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12406 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12378 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12337 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
by Context. Now Context has exactly the same semantics as Variables.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12329 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
only used to allow a module to be ended before the summaries were
restored what can be solved by moving upwards the place where the
summaries are restored).
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12275 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
(uniformisation of function names, classification). One of the most
visible change is the renaming of section_path into full_path (the
use of name section was obsolete due to the module system, but I
don't know if the new name is the best chosen one - especially it
remains some "sp" here and there).
- Simplification of the interface of classify_object (first argument dropped).
- Simplification of the code for vernac keyword "End".
- Other small cleaning or dead code removal.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12265 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
lists.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12154 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
definitions and variables (may increase the vo's size a bit), which in
turn fixes discharging with manual implicit args only.
Fix Context to correctly handle "kept" assumptions for typeclasses,
discharging a class variable when any variable bound in it is used.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12150 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@11765 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
and set Declare ML Module as a regular substitutive object so that
Declare ML Module is treated at the right place in the order of
appearance of substitutive declarations of a required module.
- Note: The full load/import mechanism for modules is not so clear:
the Require part of a Require Import inside a module is set outside
the module at module closing but the Import part remains inside (why not
to put the "special" objects in the module too?);
moreover the "substitute" and "keep" objects of a module are
desynchronised at module closing (is that really harmless/necessary?).
- Treatment of .cmxs targets in coq_makefile and in coqdep.
- Better make clean in coq_makefile generated makefiles.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@11623 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@11253 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
setting "Set Manual Implicit Arguments" for manual-only implicits.
Fix test-suite script. This removes the discharge_info argument of
"dynamic" object's rebuild function.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@11242 85f007b7-540e-0410-9357-904b9bb8a0f7
|
