| Age | Commit message (Collapse) | Author |
|---|
|
case of missing record field
|
|
|
|
While we were adding a new field into `QuestionMark`, we
decided to go ahead and refactor the constructor to hold
an actual record. This record now holds the name, obligations, and
whether the evar represents a missing record field.
This is used to provide better error messages on missing record
fields.
|
|
Fixes #8067. This is becoming the default in many developments, so it
makes sense to require it too, both for Coq and for Plugins.
|
|
We fix the issue by removing terms of the substitutions which have
free variables and are thus not interpretable in the context of the
"ltac:" subterm.
This remains rather ad hoc, since, in an expression "Notation f x :=
ltac:(foo)", we interpret "x" at calling time of "foo" rather than at
use time of "x" in foo, even if "x" is not necessary.
We could also imagine that binders in the ltac expressions are then
interpreted but that would start to be (very) complicated.
Note that this will presumably "fix" ltac2 quotations at the same
time.
|
|
reference was defined as Ident or Qualid, but the qualid type already
permits empty paths. So we had effectively two representations for
unqualified names, that were not seen as equal by eq_reference.
We remove the reference type and replace its uses by qualid.
|
|
|
|
- move_location to proofs/logic.
- intro_pattern_naming to Namegen.
|
|
|
|
Redundancy between finding section variables in both interp_var and
interp_qualid could probably be cleaned.
|
|
patterns with different variables
|
|
Could still be made more detailed with more time.
|
|
|
|
Previously to this patch, `Notation_term` contained information about
both parsing and notation interpretation.
We split notation grammar to a file `parsing/notation_gram` as to make
`interp/` not to depend on some parsing structures such as entries.
|
|
We remove most of what was deprecated in `Term`. Now, `intf` and
`kernel` are almost deprecation-free, tho I am not very convinced
about the whole `Term -> Constr` renaming but I'm afraid there is no
way back.
Inconsistencies with the constructor policy (see #6440) remain along
the code-base and I'm afraid I don't see a plan to reconcile them.
The `Sorts` deprecation is hard to finalize, opening `Sorts` is not a
good idea as someone added a `List` module inside it.
|
|
We move syntax for universes from `Misctypes` to `Glob_term`. There is
basically no reason that this type is there instead of the proper
file, as witnessed by the diff.
Unfortunately the change is not compatible due to moving a type to a
higher level in the hierarchy, but we expect few problems.
This change plus the related PR (#6515) moving universe declaration to
their proper place make `Misctypes` into basically an empty file save
for introduction patterns.
|
|
In #6092, `global_reference` was moved to `kernel`. It makes sense to
go further and use the current kernel style for names.
This has a good effect on the dependency graph, as some core modules
don't depend on library anymore.
A question about providing equality for the GloRef module remains, as
there are two different notions of equality for constants. In that
sense, `KerPair` seems suspicious and at some point it should be
looked at.
|
|
The "Stream.Error" printer does add a period, so, the messages
themselves should not.
|
|
The `reference` type contains some ad-hoc locations in its
constructors, but there is no reason not to handle them with the
standard attribute container provided by `CAst.t`.
An orthogonal topic to this commit is whether the `reference` type
should contain a location or not at all.
It seems that many places would become a bit clearer by splitting
`reference` into non-located `reference` and `lreference`, however
some other places become messier so we maintain the current status-quo
for now.
|
|
We continue with the work of #402 and #6745 and update most of the
remaining parts of the AST:
- module declarations
- intro patterns
- top-level sentences
Now, parsed documents should be full annotated by `CAst` nodes.
|
|
|
|
|
|
This commit was motivated by true spurious conversions arising in my
`to_constr` debug branch.
The changes here need careful review as the tradeoffs are subtle and
still a lot of clean up remains to be done in `vernac/*`.
We have opted for penalize [minimally] the few users coming from true
`Constr`-land, but I am sure we can tweak code in a much better way.
In particular, it is not clear if internalization should take an
`evar_map` even in the cases where it is not triggered, see the
changes under `plugins` for a good example.
Also, the new return type of `Pretyping.understand` should undergo
careful review.
We don't touch `Impargs` as it is not clear how to proceed, however,
the current type of `compute_implicits_gen` looks very suspicious as
it is called often with free evars.
Some TODOs are:
- impargs was calling whd_all, the Econstr equivalent can be either
+ Reductionops.whd_all [which does refolding and no sharing]
+ Reductionops.clos_whd_flags with all as a flag.
|
|
|
|
We follow the suggestions in #402 and turn uses of `Loc.located` in
`vernac` into `CAst.t`. The impact should be low as this change mostly
affects top-level vernaculars.
With this change, we are even closer to automatically map a text
document to its AST in a programmatic way.
|
|
For compatibility, the default is to parse as ident and not as pattern.
|
|
Concretely, we provide "constr as ident", "constr as strict pattern"
and "constr as pattern".
This tells to parse a binder as a constr, restricting to only ident or
to only a strict pattern, or to a pattern which can also be an ident.
The "strict pattern" modifier allows to restrict the use of patterns
in printing rules. This allows e.g. to select the appropriate rule for
printing between {x|P} and {'pat|P}.
|
|
This now works not only for parsing of fun/forall (as in 8.6), but
also for arbitraty notations with binders and for printing.
|
|
|
|
This allows in particular to define notations with 'pat style binders.
E.g.:
A non-trivial change in this commit is storing binders and patterns
separately from terms.
This is not strictly necessary but has some advantages.
However, it is relatively common to have binders also used as terms,
or binders parsed as terms. Thus, it is already relatively common to
embed binders into terms (see e.g. notation for ETA in output test
Notations3.v) or to coerce terms to idents (see e.g. the notation for
{x|P} where x is parsed as a constr).
So, it is as simple to always store idents (and eventually patterns)
as terms.
|
|
For instance, the following is now possible:
Check {(x,y)|x+y=0}.
Some questions remains. Maybe, by consistency, the notation should be
"{'(x,y)|x+y=0}"...
|
|
(binders shall be substitutable by arbitrary cases patterns).
|
|
|
|
Seizing this opportunity to generalize the possibility for different
associativity into simply reversing the order or not. Also dropping
some dead code.
Example of recursive notation now working:
Notation "[ a , .. , b |- A ]" := (cons b .. (cons a nil) .., A).
|
|
This allows for instance to support recursive notations of the form:
Notation "! x .. y # A #" :=
(((forall x, x=x),(forall x, x=0)), .. (((forall y, y=y),(forall y, y=0)), A) ..)
(at level 200, x binder).
|
|
This makes treatment of recursive binders closer to the one of
recursive terms. It is unclear whether there are interesting notations
liable to use this, but this shall make easier mixing recursive
binders and recursive terms as in next commits.
Example of (artificial) notation that this commit supports:
Notation "! x .. y # A #" :=
(.. (A,(forall x, True)) ..,(forall y, True))
(at level 200, x binder).
|
|
- The "terminator" of a recursive notation is now interpreted in the
environment in which it occurs rather than the environment at the
beginning of the recursive patterns.
Note that due to a tolerance in checking unbound variables of
notations, a variable unbound in the environment was still working
ok as long as no user-given variable was shadowing a private
variable of the notation - see the "exists_mixed" example in
test-suite.
Conversely, in a notation such as:
Notation "!! x .. y # A #" :=
((forall x, True), .. ((forall y, True), A) ..)
(at level 200, x binder).
Check !! a b # a=b #.
The unbound "a" was detected only at pretyping and not as expected
at internalizing time, due to "a=b" interpreted in context
containing a and b.
- Similarly, each binder is now interpreted in the environment in
which it occurs rather than as if the sequence of binders was
dependent from the left to the right (such a dependency was ok for
"forall" or "exists" but not in general).
For instance, in:
Notation "!! x .. y # A #" :=
((forall x, True), .. ((forall y, True), A) ..)
(at level 200, x binder).
Check !! (a:nat) (b:a=a) # True #.
The illegal dependency of the type of b in a was detected only at
pretyping time.
- If a let-in occurs in the sequence of binders of a notation with a
recursive pattern, it is now inserted in between the occurrences of
the iterator rather than glued with the forall/fun of the iterator.
For instance, in:
Notation "'exists_true' x .. y , P" :=
(exists x, True /\ .. (exists y, True /\ P) ..)
(at level 200, x binder).
Check exists_true '(x,y) (u:=0), x=y.
We now get
exists '(x, y), True /\ (let u := 0 in True /\ x = y)
while we had before the let-in breaking the repeated pattern:
exists '(x, y), (let u := 0 in True /\ x = y)
This is more compositional, and, in particular, the printer algorithm
now recognizes the pattern which is otherwise broken.
|
|
- renaming lvar into ntnvars when relevant, for consistency
- renaming sometimes genv into env (intern_env) so as to remain
consistent with other parts of the code
|
|
This works for contexts in Definition and co, but not yet for "fun" and co.
|
|
The motivations are:
- To reflect the concrete syntax more closely.
- To factorize the different places where "contexts" are internalized:
before this patch, there is a different treatment of `Definition f
'(x,y) := x+y` and `Definition f := fun '(x,y) => x+y`, and a hack
to interpret `Definition f `pat := c : t`. With the patch, the fix
to avoid seeing a variable named `pat` works for both `fun 'x =>
...` and `Definition f 'x := ...`.
The drawbacks are:
- Counterpart to reflecting the concrete syntax more closerly, there
are more redundancies in the syntax. For instance, the case `CLetIn
(na,b,t,c)` can appears also in the form `CProdN (CLocalDef
(na,b,t)::rest,d)` and `CLambdaN (CLocalDef (na,b,t)::rest,d)`.
- Changes in the API, hence adaptation of plugins referring to `constr_expr` needed.
|
|
|
|
We enforce that variables of the notation hide the variables in the
implicit-arguments map.
Will be useful when there will be a special map of single binders
when interpreting notations.
|
|
|
|
There is no way today to distinguish primitive projections from
compatibility constants, at least in the case of a record without
parameters.
We remedy to this by always using the r.(p) syntax when printing
primitive projections, even with Set Printing All.
The input syntax r.(p) is still elaborated to GApp, so that we can preserve
the compatibility layer. Hopefully we can make up a plan to get rid of that
layer, but it will require fixing a few problems.
|
|
Fixes BZ#5726.
|
|
|
|
|
|
We remove a lot of uses of `evar_map` ref in `vernac`, cleanup step
desirable to progress with EConstr there.
|
|
We fix quite a few types, and perform some cleanup wrt to the
evar_map, in particular we prefer to thread it now as otherwise
it may become trickier to check when we are using the correct one.
Thanks to @SkySkimmer for lots of comments and bug-finding.
|
|
This is to have a better symmetry between CCases and GCases.
|
