| Age | Commit message (Collapse) | Author |
|---|
|
We systematically use Wg_MessageView for both the message panel and each
Query tab; we register all MessageView in a RoutedMessageViews where the
default route (0) is the message panel. Queries from the Query panel pick
a non zero route to have their feedback message delivered to their MessageView
|
|
|
|
|
|
|
|
|
|
We again remove another user of Stateid.dummy. However, we need to
adapt the protocol so `Coq.query` takes the `route_id` and we can
redirect the output properly to the subwindow.
|
|
When inserting a character in an already processed buffer, a message is
sent to Coq so that the proof is backtracked and the character is
inserted. If a second character is inserted while Coq is still busy with
the first message, the action is canceled, but the signal is no longer
dropped so that the second character is properly inserted.
|
|
On the user side, coqtop and coqc take a list of warning names or categories
after -w. No prefix means activate the warning, a "-" prefix means deactivate
it, and "+" means turn the warning into an error. Special categories include
"all", and "default" which contains the warnings enabled by default.
We also provide a vernacular Set Warnings which takes the same flags as argument.
Note that coqc now prints warnings.
The name and category of a warning are printed with the warning itself.
On the developer side, Feedback.msg_warning is still accessible, but the
recommended way to print a warning is in two steps:
1) create it by:
let warn_my_warning =
CWarnings.create ~name:"my-warning" ~category:"my-category"
(fun args -> Pp.strbrk ...)
2) print it by:
warn_my_warning args
|
|
|
|
|
|
|
|
|
|
There is no remaining global preference record anymore, every preference
is now defined in the new event-based style.
|
|
A lot of legacy code has been removed in the process in favour of
signal-based interactions.
|
|
Some old style references remain because all type converters are not
implemented yet.
|
|
|
|
|
|
This grants wish #4194.
|
|
No "read-only" terminator. If no terminator is present the UI
complains. If the terminator is different, STM warns but
continues. The STM warns that the "check the document" button
will not honor the terminator change, and what to do to avoid
that.
Technically, one cannot turn (a posteriori) an axiom into a theorem
and vice versa. Could be done, but not with a small patch.
|
|
|
|
Instead of setting the last modified part of the text to be the insert point,
we register all modifications to the buffer between to user actions and take
the last modified point to be the least offset of all those modifications.
|
|
We make the deletion callback not to regenerate a task id, as the insertion
callback does. I can't find a particular reason for this dissymetry, and it
was indeed causing trouble.
|
|
Also fixes bug #4030.
|
|
|
|
This allows a nifty display of the current state of the document through
a dedicated progress bar.
Also closes bug #3764.
|
|
|
|
This way a user *can* use coqide with -debug
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This should fix Arnaud's bug (reported by private email) that makes
coq eat two sentences at once (and process only the first one).
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16907 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
It uses Str, hence it also supports captures \(..\) and \1 .. \n
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16904 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Many things were wrong. Error tags were deleted by mistake, the
screen was recentered on `INSERT using the wrong function (that cause
some horizontal scrolling even if it was not needed), the
cursor not advanced to the end of the wrong sentence.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16874 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- Tabs have labels derived from the query (e.g. "About eq_ind" will have
"eq_ind" as its label, that is better than "Page 1" ;-)
- Tabs have a [x] close icon
- Icon to create a new tab in in the notebook
- Dispotically grab the F1 key to open/close the query pane
(alt-esc is grabbed by windows managers these days)
- Esc hides the query pane (like the search pane)
- F1 puts a detached query pane in front
- Tab switches from the combo-box to the entry on its right
- Detaching is taken-over, and the query pane is reparented in a regular
window that can be resized
- A detached query pane can be put back by closing the window
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16817 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16816 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- the zone to be edited is now between the marks
start_of_input and stop_of_input
- when -debug is given, the edit zone is underlined
- the cmd_stack is focused/unfocused according to the new protocol
- read only tag resurrected and used to block the "Qed" ending
a focused zone
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16814 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Trying to understand if the edit concernes the processed zone
from the begin_user_action callback was a bad idea, the callback
cannot reliably know where the edit takes place (E.g. insert mark
means nothing: one can copy from the insert point but paste elsewhere).
The callbacks delete_range and insert_text do know where the edit is and
can ask coq to backtrack if needed. If coq is busy, the user action is
cancelled (the locked zone cannot be unlocked).
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16715 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
That is pretty tricky, and is not as nice I would like
for to_process text (that is still considered as locked).
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16698 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Main changes for STM:
1) protocol changed to carry edit/state ids
2) colouring reflects the actual status of every span (evaluated or not)
3) button to force the evaluation of the whole buffer
4) cmd_stack and backtracking completely changed to use state numbers
instead of counting sentences
5) feedback messages are completely asynchronous, and the whole protocol
could be made so with a minor effort, but there is little point in it
right now. Left as a future improvement. Missing bit: add
sentence-id to responses of interp command.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16677 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
A new feedback message for globalization infos can be sent by
Coq to Coqide. Coqide stores the information in the proof of
concept module wg_Tooltip, that also sets things up so that
these infos are displayed as a tooltip when the mouse is over
the text they are attached to. These infos are available only
on locked text, and on the text just processed in the case of an
error (on this piece of text, they vanish as the error tag vanishes
as soon as the user edits the text).
wg_Tooltip stocks these infos as lazy string. This is not needed
in the proof of concept, but is necessary to scale up: Coq may not
generate the full piece of info when the message is sent (because of
high computational cost or big size) and just send an id; later on,
when/if the user asks for the piece of info, the gui requests the
info explicitly using the id.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16456 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
This amounts to a new type of message called "feedback" and defined in
Interface to hold structured data. Coq sends feedback messages
asynchronously (they are all fetched, like regular messages, together
with the main response to a call) and they are related to a specific
sentence by an id.
Other changes:
- CoqOps pushes the sentence to be processed onto the cmd_stack
before processing it and pulls it back if Coq.intep fails, in this way
the handler for feedback messages can just look at the cmd_stack
to find the offset of the sentence to eventually apply the new Gtk.tag.
- The class coqops takes in input a coqtop to set its feedback_handle.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16451 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16323 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
to be untagged whenever trying to modify the first offset.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16230 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
PrintOpt.set now only updates the state Hashtbl of options,
a PrintOpt.enforce is mandatory to transmit them to coqtop.
This enforce is done for instance by Coq.goals.
The various signal handlers about coqide's buffer are now installed
in session creation, and not anymore via the coqops initializer.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16105 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Main victim is analyzed_view :
- some unnecessary methods have been killed (hep_for_keyword for instance)
- some other migrated elsewhere (recenter_input, find_next_occurrence, ...)
- analyzed_view is now split in two : fileops (filename, save, revert, ...)
and coqops (process_next_phrase, ...)
Four new files created:
- Sentence (for tag_on_insert and alii)
- FileOps (ex-first-half of analyzed_view)
- CoqOps (ex-second-half of analyzed_view)
- Session (ex-record viewable_script and functions about it)
Also lots of renaming, trying to be shorter (but still meaningful) and
more uniform
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16057 85f007b7-540e-0410-9357-904b9bb8a0f7
|
