| Age | Commit message (Collapse) | Author |
|---|
|
Instead of relying on the current position of the cursor, we rather use
a dedicated mark in the message view.
|
|
This patch splits pretty printing representation from IO operations.
- `Pp` is kept in charge of the abstract pretty printing representation.
- The `Feedback` module provides interface for doing printing IO.
The patch continues work initiated for 8.5 and has the following effects:
- The following functions in `Pp`: `pp`, `ppnl`, `pperr`, `pperrnl`,
`pperr_flush`, `pp_flush`, `flush_all`, `msg`, `msgnl`, `msgerr`,
`msgerrnl`, `message` are removed. `Feedback.msg_*` functions must be
used instead.
- Feedback provides different backends to handle output, currently,
`stdout`, `emacs` and CoqIDE backends are provided.
- Clients cannot specify flush policy anymore, thus `pp_flush` et al are
gone.
- `Feedback.feedback` takes an `edit_or_state_id` instead of the old
mix.
Lightly tested: Test-suite passes, Proof General and CoqIDE seem to work.
|
|
|
|
|
|
|
|
|
|
The old behavior was extremely annoying, especially when using coqide from
the command line, since the "open" box would then point to a seemingly
random point of the filesystem rather than to the directory of the files
currently being edited (since they were passed on the command line rather
than by point-and-click).
The new behavior matches the one of mainstream editors, e.g. emacs, gedit.
|
|
|
|
|
|
|
|
|
|
lib/interface split into:
- lib/feedback
subscribe-based feedback bus (also used by coqidetop)
- ide/interface
definition of coqide protocol messages
lib/pp
structured info/err/warn messages
lib/serialize split into:
- lib/serialize
generic xml serialization (list, pairs, int, loc, ...)
used by coqide but potentially useful to other interfaces
- ide/xmlprotocol
serialization of protocol messages as in ide/interface
the only drawback is that coqidetop needs -thread
and I had to pass that option to all files in ide/
|
|
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16896 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Parenthesis matching on click in all term displays.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16643 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16476 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16455 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
With Pierre-Marie, we discovered the hard way that Glib.Io reads
are *not* non-blocking by default as I thought. My bad...
This was causing nasty freezes of coqide in the rare cases where
the final read was exactly filling the buffer (which was of size 1024).
Now:
- the input channels from coqtop (and various other external commands)
are given to Unix.set_nonblock
- Exceptions in our io_read_all (typically a kind of EAGAIN) terminate
the read
- We can now switch to Glib.Io.read_chars instead of the deprecated
Glib.Io.read.
- Btw, we use a larger buffer (8192).
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16138 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Main victim is analyzed_view :
- some unnecessary methods have been killed (hep_for_keyword for instance)
- some other migrated elsewhere (recenter_input, find_next_occurrence, ...)
- analyzed_view is now split in two : fileops (filename, save, revert, ...)
and coqops (process_next_phrase, ...)
Four new files created:
- Sentence (for tag_on_insert and alii)
- FileOps (ex-first-half of analyzed_view)
- CoqOps (ex-second-half of analyzed_view)
- Session (ex-record viewable_script and functions about it)
Also lots of renaming, trying to be shorter (but still meaningful) and
more uniform
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16057 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Threads were only there to handle blocking dialogs with the different
coqtops. But programming with threads have drawbacks : complex mutex
infrastructure, possible deadlocks, etc. In particular gtk functions
are not meant to be called from a thread which isn't the gtk main loop,
(unless some gtk mutex have been taken). This seem to pose problem
specifically in win32 (and macosx ?), hence the use of the
GtkThread.(a)sync hack for scheduling code for execution in the gtk
main loop.
Instead, we now use the Glib.Io module to install a callback that will
be runned when some answer of coqtop is available on the channel.
This implies using now a continuation-passing style: for instance,
instead of two sequential requests to coqtop, we'll now have the
2nd request inside the callback handling the answer to the 1st request.
Remarks:
- Also use asynchronous i/o for external commands (editor, coqc, make...).
Launching an external editor or browser won't freeze coqide anymore.
- Reworked handling of coqtop process, especially when closing them.
A responsive coqtop should now hara-kiri immediatly when its input
channel is closed. Otherwise we try later a soft kill, then some
hard kills if necessary. If nothing work we warns the user.
When quitting coqide, all this might induce a small delay (2s at worse).
- Be careful now to avoid "long" computations (or blocking i/o) in
a coqide function. Experimentally, it seems that loading/saving a .v
file is quick enough. If necessary, we could use asynchronous i/o
also for writing the .v, but for loading I've no clue.
- In the Coqide module, we ensure that the current continuation k
will indeed be run at the end thanks to an abstract return type
(void = opaque copy of unit).
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16049 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16046 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
... and many more code cleanup concerning file loading
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16034 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16033 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- indentation, wrap long lines
- factorize some code
- split Coqide.main in many subfunctions
- Put the callbacks in modules (e.g. File.load)
- ...
Normally this commit shouldn't change coqtop behavior
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16032 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15715 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
be backward compatible...
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15501 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15494 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15352 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15328 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
If it is AUTO then we keep the heuristic to change coqide by coqtop in Sys.executable_name.
If it fails coqtop location must be given by the users.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15188 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Beware, it means that files position is not relative to coqtop position
but is given by XDG_DATA_DIRS and XDG_CONFIG_DIRS.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14822 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14442 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14439 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
used
This is an adaptation of commit r13751 of branch 8.3
Even if coqide.exe keeps its console by default for the moment,
we try to allow turning it off (for instance via the mkwinapp tool) :
for that we need to be cautious about the use of functions
like prerr_endline. Since stderr doesn't exists in this settings,
such functions trigger a Sys_error "bad file descriptor".
This patch protects many access to std** by a (try ... with _ ->()).
Nota: with camlp5 < 6.02.1, Print Grammar was also generating
such a Sys_error.
TODO: we should try to figure a way of displaying messages (both
debug and early/late error message). A log file ? A popup ?
diplay in the response buffer ?
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14040 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13323 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Still messy.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13040 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- Many of them were broken, some of them after Pierre B's rework
of mli for ocamldoc, but not only (many bad annotation, many files
with no svn property about Id, etc)
- Useless for those of us that work with git-svn (and a fortiori
in a forthcoming git-only setting)
- Even in svn, they seem to be of little interest
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12972 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
In trunk: New strategy for compiling and finding index_url.txt. After
all, this file is not specific to CoqIDE but to the
documentation. Hence, it seems better to install it close to the
documentation. If the documentation is locally installed, it is easy
to find the file index_url.txt but what to do if the documentation is
remote? We would need a http getter. Does this mean we have to rely on
wget or so? In the absence of answer to this question, it seems
reasonable, first to assume the doc to be locally installed, second to
have a local copy of index_url.txt ready in the installation directory
of CoqIDE.
Also added an "automatic" field in the CoqIDE url preference to
prevent the user to have to update his preference file every time a
new version of Coq is out and the link to the doc change.
In 8.2: Added a minima the installation of index_urls.txt but the user
will have to update its preferences because the links
"http://coq.inria.fr/doc/Reference-Manual010.html#..." do not longer
exist.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12278 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- removed circular dependency between record and class used to keep
track of sessions => no need for mutable option in record.
- more 'a option ref pruning
- more code splitting
- more alpha-rewriting
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@11968 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
save as dialogs of coqide to a not deprecated widget, add filtering of *.v files in these dialogs
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@11006 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- Colorisation:
- on ne colorie que les noms de commandes que si en début de phrase
(par exemple: Definition F := fun Local => Local) ne colorie pas
Local),
- ajout de motifs plus sophistiqué, (par exemple, tous les Set/Unset
sont uniformément mis en valeur).
- Backtracking: résolution bug #1538 et réactivation de la possibilité de
déclarer des défs, types, etc pendant une session de preuve. En revanche,
il n'est pas clair que cela fonctionne bien avec le mode déclaratif.
- Messages d'erreur : on ne capture la sortie de coq qu'après
l'initialisation pour que les erreurs d'initialisation soit
affichées (cf bug #1424 and item 5 of #1123).
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@10915 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@7608 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@7603 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@7046 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@6621 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@5920 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@5161 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@4424 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@4232 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@4155 85f007b7-540e-0410-9357-904b9bb8a0f7
|
