| Age | Commit message (Collapse) | Author |
|---|
|
This is a pre-requisite to use automated formatting tools such as
`ocamlformat`, also, there were quite a few places where the comments
had basically no effect, thus it was confusing for the developer.
p.s: Reading some comments was a lot of fun :)
|
|
|
|
|
|
|
|
functions
|
|
|
|
This emphasizes that it works only on inductive types.
Also, the name is_template_polymorphic will be reused for a more
general version.
|
|
This is a step towards limiting calls to the global environment.
Incidentally unify naming evd -> sigma in Termops.
|
|
for the determination of evars that can be turned into obligations.
|
|
This avoids all the side effects associated with the manipulation of an
unresolvable flag. In the new design:
- The evar_map stores a set of evars that are candidates for typeclass
resolution, which can be retrieved and set.
We maintain the invariant that it always contains only undefined
evars.
- At the creation time of an evar (new_evar), we classify it as a
potential candidate of resolution.
- This uses a hook to test if the conclusion ends in a typeclass
application. (hook set in typeclasses.ml)
- This is an approximation if the conclusion is an existential (i.e.
not yet determined). In that case we register the evar as
potentially a typeclass instance, and later phases must consider
that case, dropping the evar if it is not a typeclass.
- One can pass the ~typeclass_candidate:false flag to new_evar to
prevent classification entirely. Typically this is for new goals
which should not ever be considered to be typeclass resolution
candidates.
- One can mark a subset of evars unresolvable later if
needed. Typically for clausenv, and marking future goals as
unresolvable even if they are typeclass goals. For clausenv for
example, after turing metas into evars we first (optionally) try a
typeclass resolution on the newly created evars and only then mark
the remaining newly created evars as subgoals. The intent of the
code looks clearer now.
This should prevent keeping testing if undefined evars are classes
all the time and crawling large sets when no typeclasses are present.
- Typeclass candidate evars stay candidates through
restriction/evar-evar solutions.
- Evd.add uses ~typeclass_candidate:false to avoid recomputing if the new
evar is a candidate. There's a deficiency in the API, in most use
cases of Evd.add we should rather use a:
`Evd.update_evar_info : evar_map -> Evar.t -> (evar_info -> evar_info)
-> evar_map`
Usually it is only about nf_evar'ing the evar_info's contents, which
doesn't change the evar candidate status.
- Typeclass resolution can now handle the set of candidates
functionally: it always starts from the set of candidates (and not the
whole undefined_map) and a filter on it, potentially splitting it in
connected components, does proof search for each component in an
evar_map with an empty set of typeclass evars (allowing clean
reentrancy), then reinstates the potential remaining unsolved
components and filtered out typeclass evars at the end of
resolution.
This means no more marking of resolvability/unresolvability
everywhere, and hopefully a more efficient implementation in general.
- This is on top of the cleanup of evar_info's currently but can
be made independent.
[typeclasses] Fix cases.ml: none of the new_evars should be typeclass candidates
Solve bug in inheritance of flags in evar-evar solutions.
Renaming unresolvable to typeclass_candidate (positive) and fix maybe_typeclass_hook
|
|
|
|
|
|
|
|
|
|
This is to move a standard combinator to the place it belongs to. An
alternative could have been to put it in termops.ml, but termops.ml is
now about econstr, so, even if it makes the kernel "bigger", constr.ml
seems to be the best place for this combinator. After all, this
combinator is canonical.
|
|
The functions in `Termops.print_*` are meant to be debug printers,
however, they are sometimes used in non-debug code due to a API
confusion.
We thus wrap such functions into an `Internal` module, improve
documentation, and switch users to the right API.
|
|
In particular we check if really used for internal debugging purpose
or to display a message to the user. In the latter case, we replace it
(when possible) by a higher-level printer (e.g. printing foo instead
of Top.foo). In the former case, we clarify that the use is a
debugging use.
Still not perfect (see a few FIXME).
|
|
More precisely: the lambda-let-expanded canonical form of branches and
return predicate is considered as part of the structure of a "match"
and is preserved.
|
|
While we were adding a new field into `QuestionMark`, we
decided to go ahead and refactor the constructor to hold
an actual record. This record now holds the name, obligations, and
whether the evar represents a missing record field.
This is used to provide better error messages on missing record
fields.
|
|
|
|
reference was defined as Ident or Qualid, but the qualid type already
permits empty paths. So we had effectively two representations for
unqualified names, that were not seen as equal by eq_reference.
We remove the reference type and replace its uses by qualid.
|
|
Note that `Assumptions` ships its own copy, but for `Constr.t`.
|
|
|
|
|
|
|
|
We now have only two notions of environments in the kernel: env and
safe_env.
|
|
We address the easy ones, but they should probably be all removed.
|
|
|
|
|
|
This API is a bit strange, I expect it will change at some point.
|
|
We bootstrap the circular evar_map <-> econstr dependency by moving
the internal EConstr.API module to Evd.MiniEConstr. Then we make the
Evd functions use econstr.
|
|
This is more efficient in general, because Termops.dependent doesn't take
advantage of the knowledge of its pattern argument.
|
|
For instance, error in "Goal forall a f, f a = 0" is now located.
|
|
When comparing 2 irrelevant universes [u] and [v] we add a "weak
constraint" [UWeak(u,v)] to the UState. Then at minimization time a
weak constraint between unrelated universes where one is flexible
causes them to be unified.
|
|
Previously [fun x : Ind@{i} => x : Ind@{j}] with Ind some cumulative
inductive would try to generate a constraint [i = j] and use
cumulativity only if this resulted in an inconsistency. This is
confusingly different from the behaviour with [Type] and means
cumulativity can only be used to lift between universes related by
strict inequalities. (This isn't a kernel restriction so there might
be some workaround to send the kernel the right constraints, but
not in a nice way.)
See modified test for more details of what is now possible.
Technical notes:
When universe constraints were inferred by comparing the shape of
terms without reduction, cumulativity was not used and so too-strict
equality constraints were generated. Then in order to use cumulativity
we had to make this comparison fail to fall back to full conversion.
When unifiying 2 instances of a cumulative inductive type, if there
are any Irrelevant universes we try to unify them if they are
flexible.
|
|
|
|
|
|
This commit was motivated by true spurious conversions arising in my
`to_constr` debug branch.
The changes here need careful review as the tradeoffs are subtle and
still a lot of clean up remains to be done in `vernac/*`.
We have opted for penalize [minimally] the few users coming from true
`Constr`-land, but I am sure we can tweak code in a much better way.
In particular, it is not clear if internalization should take an
`evar_map` even in the cases where it is not triggered, see the
changes under `plugins` for a good example.
Also, the new return type of `Pretyping.understand` should undergo
careful review.
We don't touch `Impargs` as it is not clear how to proceed, however,
the current type of `compute_implicits_gen` looks very suspicious as
it is called often with free evars.
Some TODOs are:
- impargs was calling whd_all, the Econstr equivalent can be either
+ Reductionops.whd_all [which does refolding and no sharing]
+ Reductionops.clos_whd_flags with all as a flag.
|
|
|
|
Fixes #6490.
`prod_applist_assum` is copied from `kernel/term.ml` to `engine/termops.ml`,
and adjusted to work with econstr.
This change uncovered a bug in `Hipattern.match_with_nodep_ind`, where
`has_nodep_prod_after` counts both products and let-ins, but was only
being passed `mib.mind_nparams`, which does not count let-ins.
Replaced with (Context.Rel.length mib.mind_params_ctxt).
|
|
They are now bound at the library + module level and can be qualified
and shadowed according to the usual rules of qualified names.
Parsing and printing of universes "u+n" done as well.
In sections, global universes are discharged as well, checking that
they can be defined globally when they are introduced
|
|
There don't really bring anything, we also correct some minor nits
with the printing function.
|
|
|
|
We do up to `Term` which is the main bulk of the changes.
|
|
This will allow to merge back `Names` with `API.Names`
|
|
|
|
It is not clear that this is really needed, but in case it happens,
one will at least have a partial result available rather than an
unexploitable global failure of the parser.
|
|
|
|
|
|
|
